[MenloSystems GmbH]
Orange One - SHG / Orange One-1

#
Description

The fiber laser system orange one-SHG delivers hundreds of mW of optical output power in the wavelength range of 510 nm – 560 nm with an optical line width below 100 kHz, typical performance is <70 kHz. It uses a ultra narrow line width single frequency fiber laser module as seed laser together with a two stage amplifier. Subsequently, the near infrared output is converted into the visible using a PPLN waveguide frequency doubler.

The orange one combines unique ultra narrow line width performance with high power levels at low ASE level. It is the ideal source for applications requiring low noise and stable performance. The laser offers high wavelength selectability and a burst noise free operation. Special attention has been paid to assure long term stability without degrading performance. The truly turnkey system is temperature stabilized with Peltier elements and therefore requires no water cooling.

The fiber laser system orange one delivers 1 or 2 W of optical output power in the wavelength range of 1020 nm – 1121 nm with an optical line width below 100 kHz, optionally <10 kHz. It uses a ultra narrow line width single frequency fiber laser module as seed laser together with a two stage amplifier. The orange one combines unique ultra narrow line width performance with high power levels at low ASE level. It is the ideal source for applications requiring low noise and stable performance. The laser offers high wavelength selectability and a burst noise free operation. Special attention has been paid to assure long term stability without degrading performance. The truly turnkey system is temperature stabilized with Peltier elements and therefore requires no water cooling. Optionally, a single pass PPLN waveguide frequency doubler (SHG) is available which provides sable and alignment free conversion of the infraread light into the visible. The orange one-SHG delivers hundreds of mW of optical output power in the wavelength range of 510 nm – 560 nm.

 

 

Feature

  • Ultra narrow linewidth
  • High power output
  • Stable single frequency operation
  • Mode hop-free tuning
  • Burst noise-free operation
  • Low phase noise and low intensity noise
  • Single mode fiber output (FC/APC)
  • Vibration-free analog fine tuning (ready-to-lock)
  • Digital coarse tuning
  • Stand-alone unit in a 19” rack system
  • with integrated power supply

 

 

Related Applications

  • Optical metrology
  • Interferometry
  • High resolution spectroscopy
  • Atom trapping
  • LIDAR sensing
  • Optical data storage

 

 

Specification
Linewidth (120 μs)

<100 kHz

Wavelength Range

1020 - 1121 nm, specify center wavelength when ordering

Center Wavelength @22°C

±0.1 nm

Temperature Tuning Range

>450 pm (-0.3 / +0.15 nm )

Piezo Tunung Range

>15 pm*

Piezo Voltage

0.. 200 V

Piezo Bandwidth

up to 10 kHz

Output Power

>1 W (up to 2 W) or >2 W (up to 4 W)- depending on selected wavelength

Output Port

PM, non-PM; 1 m patch cord included (others on request)**, FC/APC - connector

Standard SHG output port

free space

ASE Level

<10 %

Additional Minitor Port

FC/APC - connector (non-PM), P >0.01 mW

UTILITY AND ENVIRONMENTAL REQUIRMENTS
Operating Voltage

110/115/230 VAC

Line Frequency

50 to 60 Hz

Power Consumption

200 W

Cooling Requirmants

no water cooling is required

Laser Frequency Stabilization

temperature stabilized with Peltier elements

Range of Operating Temperature

22 ± 5 °C

Dimensions

448 x132 x 437 mm3

Weight

20 kg

 

 

 


DOWNLOAD